The body of the Swirling Aerosol Button VV1.1 is a part of the large two-part swirling sprayer that is used with the female aerosol valve.

Its dispensing volume can be low, medium or high.

It is made of polypropylene.

Width of the groove: 0.35/0.50 mm

For VV1.1 are suitable these nozzles:

grey nozzle V1-38 (swirling, outlet 0.38mm)

black nozzle V1-50 (swirling, outlet 0.50mm)

blue nozzle V1-30 (swirling, outlet 0.30mm)

blue nozzle V2-30 (swirling, outlet 0.30mm)

Semi-Swirling Aerosol Button VP2.1 is suitable for male aerosol valves with stem diameter of 4 mm.

This body of the aerosol button is a part of the large two-part semi-swirling sprayer having a high dispensing volume.

Combined with a suitable nozzle facilitates semi-swirling or rough spray characteristics or an application tube can be installed.

It is made of polypropylene.

For this button VP2.1 are suitable these nozzles:

– nozzle red P1-50 – semi-swirling, circular spray characteristic, insert 0.50 mm

– yellow nozzle P1-100 – semi-swirling, circular spray characteristic, insert 1.00 mm

– blue nozzle S1- special nozzle suitable for dispensing products in form of non-dispensed jets directed to inaccessible places

– black nozzle S2 – special nozzle for rough spray characteristic or for application tube of a desired lenght and the outer diameter of 2mm

Semi-Swirling Aerosol Button VP4.1 is suitable for female aerosol valves.

This body of the aerosol button is a part of the large sprayer having a low, medium or high dispensing volume.

It is made of polypropylene.

Width of the groove: 0.50 / 1.00 mm

For VP4.1 is suitable this nozzle:

red nozzle P2-50 (semi-swirling, insert 0,50mm, oval spray characteristic with dimensions of 100×30 ± 15%mm, applied from the distance of 250mm)

Special Non-Swirling Aerosol Button VS1 is suitable for female aerosol valves.

This body of the aerosol button is a part of the large special sprayer having a medium or high dispensing volume. The button facilitates rough spray characteristics or an application tube with the outer diameter of 2 mm can be inserted into the outlet opening.

It is made of polypropylene.

Width of the groove: 0.50 mm , 1.00 mm.

Non-Swirling Aerosol Button VS2 is suitable for female aerosol valves.

This body of the aerosol button is a part of the large special sprayer with a high dispensing volume.

Combined with a suitable nozzle, it facilitates narrow non-swirling spray characteristics of a thin or rather thick active substance or it can be fitted with a nozzle intended for the application tube having the outer diameter of 3 mm.

The button is made of polypropylene.

It forms a component part of “Chamber Applicator”.

Width of the groove:

1.00 mm

Swirling Aerosol Button VV2.1 is suitible for male aerosol valves with stem diameter of 4 mm.

Its dispensing volume can be low, medium or high.

It is made of polypropylene.

For VV2.1 are suitable these nozzles:

grey nozzle V1-38 (swirling, outlet 0.38mm)

black nozzle V1-50 (swirling, outlet 0.50mm)

blue nozzle V1-30 (swirling, outlet 0.30mm)

blue nozzle V2-30 (swirling, outlet 0.30mm)

dark blue nozzle A3-34(swirling, outlet 0,34mm)

Non-Swirling Aerosol Button VS3 is suitable for female aerosol valves.

The button has three input grooves to provide very big output with flowing of contents on the big distance.

It is made of polypropylene.

Width of the groove: 3 x 1.00 mm

Oil Spray Actuator AOL1 is suitable for use with BOV valve with the stem diameter of 4 mm.

Actuator covers the valve.

Suitable with caps:

cap 35.1.13

cap 35.1.10

Foam Actuator AP6 is suitible for male aerosol valves with stem diameter of 4 mm. This actuator is intended for products forming foam during application.

The system dispenses a product in the basic position (actuator up).

It is made of polypropylene.

AP6 is suitable with caps:

cap 35.1.10

cap 35.1.13

Non-Swirling Aerosol Button CAR 10 is suitable for male aerosol valves with stem diameter of 4 mm.

This button is suitable for dispensing filling into specific and hard to accessible places.

Example of application: for defrosters, brake system cleaners, lubricants and other technical preparations.

Spray Actuator AR1 is used for de-icing. This actuator is used with the male aerosol valve having a stem with diameter of 3.40 mm.

The applicator outlet is designed in such a way that it can be inserted in a lock or another opening.

By pushing the aerosol container, the product is dispensed into the opening and de-ices it (or lubricates etc.).

Spray Actuator AU1 is used with the male aerosol valves having a stem with diameter of 3.40 / 4.00 mm.

Male Aerosol Metering Valve – AV10 has mounting cup Bombe with diameter of 25,4 mm – Fe tin plated 5.0/m2, both sides colorless varnished. Metering dispensing. One dose of dispensing is 0.08 ml.

Male Aerosol Special Valve – AV08, with second name Ball Valve, has mounting cup from Al, Fe.

Dispensing in all position.

Male Aerosol Valve ‘Bag-On-Valve’ – AV07 has mounting cup with diameter of 25.4 mm – AL, Fe. Suitable for dispensing in any position.
With BOV, the propellant is separated from the active ingredient in the aerosol package. A unique bag is used to isolate the product in the aerosol can. As a result, there is no direct touch, which has no impact on the active liquid’s quality.
The amount of propellant gas in the final package for consumers has decreased as a result of this valve. This solution guarantees almost 100% application of the product.

Additionally, it decreases the need for preservatives.

Male Aerosol Powder Valve – AV06 has mounting cup Bombe with diameter of 25.4 mm – AL. For powder filling.

Male Aerosol Standard Valve – AV05 has mounting cup with diameter of 25.4 mm – AL.

Continuous dispensing.

Male Aerosol Special Valve – AV04 has mounting cup with diameter of 20 mm – Al.

Continuous dispensing.

Female Aerosol Standard Valve – AV01 has mounting cup with diameter of 25.4 mm – Fe, AL. Continuous dispensing.

Female Aerosol Ball Valve – AV09 has mounting cup with diameter of 25,4 mm – Fe, Al. Dispense in all positions.